Router RUT500 182 €

RUT500 is compact 3G router with high speed wireless and Ethernet connections. Internal HSPA+ modem can reach download rate of up to 21Mbps. Router supports the latest IEEE802.11n as well as IEEE802.11b/g standards and provides wireless receiving and transmitting rate of up to 150 Mbps. External antenna connectors make it possible to attach desired antennas and to easily find the best signal location.
This router is ideal for people who‘d like to share their internet on the go, as it is not restricted by a cumbersome cable connection. Unrestricted, but not forgotten: the router still supports internet distribution via a broadband cable, simply plug it in to the wan port, set the router to a correct mode and you‘re ready to browse.

Description

Downlink of 21Mbps
Uplink of 5.76Mbps
Complies with IEEE 802.11n, IEEE 802.11g, IEEE 802.11b wireless standards
Complies with IEEE 802.3 and IEEE 802.3u standards
Four Ethernet ports
Durable aluminum housing
External antennas (several options available)
Integrated OpenVPN, IPSec and Dynamic DNS
3G backup WAN function
SMS Reboot and Status by SMS functions
Send/read SMS by HTTP POST/GET methods
Status (including 3G information) monitoring by SNMP
DIN rail mounting (optional)
Two pin terminal block power connector (optional)
Wide input voltage range (new revision only)
Power over Ethernet (LAN and WAN) ports (new revision only, not compliant with IEEE 802.3af-2003)

UMTS
850/900/AWS1700/1900/2100 MHz
HSUPA: 21 Mbps (Cat 14) DL, 5.76 Mbps (Cat 6) UL
UMTS: 384 kbps DL/384 kbps UL
3 dBi GSM/UMTS anténa
Konektor pre všesmerovú Rx anténu
GPRS: 107 kbps DL/85.6 kbps UL (class 33)
EDGE: 296 kbps DL/236.8 kbps UL (class 33)

GSM
850/900/1800/1900 MHz
Power Class 4 (2 W, 33 dBm) GSM/GPRS 850/900 MHz
Power Class 1 (1 W, 30 dBm) GSM/GPRS 1800/1900 MHz
Power Class E2 (0.5 W, 27 dBm) for EDGE 850/900 MHz
Power Class E2 (0.4 W, 26 dBm) for EDGE 1800/1900 MHz
GSM: 14.4 kbps DL/14.4 kbps UL

Technical Parameters

LAN and Wi-Fi
Wireless AP, Router, 4-Port Switch and Firewall in one device
High performance 320 MHz CPU with 256 Mbits SDRAM
IEEE 802.3, IEEE 802.3u standards
IEEE 802.11b/g/n Wi-Fi standards
64/128-bit WEP, WPA, WPA2, WPA&WPA2 encryption methods
2.401 – 2.495GHz Wi-Fi frequency range
20dBm max Wi-Fi TX power
Wi-Fi receiver sensitivity:

  • 802.11b: -86dBm at 1Mbps; -82dBm at 11Mbps
  • 802.11g: -84dBm at 6Mbps; -68dBm at 54Mbps
  • 802.11n: -83dBm at MCS0 and 20MHz BW
  • 802.11n: -80dBm at MCS2 and 20MHz BW
  • 802.11n: -75dBm at MCS4 and 20MHz BW
  • 802.11n: -68dBm at MCS7 and 20MHz BW

3x LAN 10/100Mbps Ethernet ports
1x WAN 10/100Mbps Ethernet port
Supports Auto MDI/MDIX
Remote/local Web management
1x 5dBi wireless antenna
SSID stealth mode and access control based over MAC address
System log to record the status of the Router
Auto negotiation/manual mode for IEEE 802.11b/g/n
Dynamic DNS
LAN access control over Internet connection
Virtual server
OpenVPN
IPSec
PPPoE
Backup WAN
SMS and Ping reboot
Status via SMS
Send/read SMS via HTTP POST/GET
Monitoring by SNMP
1x Power LED, 4x LAN status LEDs

Dimensions (H x W x D) 100mm x 85mm x 36mm
Weight 210g
Power supply 100 – 240 VAC -> 9 VDC wall adapter
Input voltage range 7 – 30VDC (8 – 18VDC for old hardware revision)
Power consumption < 7W Antenna connectors 2 x SMA for GSM (1xSMA for HSUPA routers), 1 x RP-SMA for Wi-Fi Indicators 4 x Ethernet LEDs, 1 x Power LED, 1 x GSM LED Operating temperature 0º to 50º C Storage temperature -20º to 70º C Operating humidity 10% to 90% Non-condensing Storage humidity 5% to 95% Non-condensing

Download